Which Parts Need Injection Molding Machines for Production?
Exploring the most favored varieties of LED bulbs, types A, G, and T are apt for manufacturing using an injection molding machine. The primary components that could reduce expenses over time in businesses utilizing injection molding machines are the light covers and plastic casings.
Then we need to know the dimension of the bulb, the most common ones are produced in 60mm and 65mm diameter, which mean A60 and A65 Led Bulb. The weight is important as well. For example, the A60 covers a weight of around 6.5g. The lighter the weight of the same type of light bulb, the more difficult it is to make the molds.
Subsequently, we must ascertain the size of the bulb; the prevalent dimensions are 60mm and 65mm in diameter, corresponding to the A60 and A65 LED bulbs, respectively. The weight also plays a crucial role. Take, for instance, the A60, which typically weighs about 6.5 grams. The challenge in mold production increases with the reduction in weight for bulbs of the same type.
Equally critical is determining the production rate of LED bulbs we aim for per hour. This information enables the injection molding machine provider, ZHENHUA Machinery, to select a machine with the appropriate tonnage to ensure the mold fulfills the production demands.
For LED lighting products seeking top market position, the control of quality and cost for each component is vital for manufacturers. The LED light bulb cover should exhibit consistent color, be smooth, and allow high light transmittance; it should be made of polycarbonate (PC). The housing should be crafted from high thermal conductivity and heat-resistant PBT material. In cases where a manufacturer may opt for a different type of modified plastic, we require the prime samples of each component for our reference.